Official Arduino MKR Wifi 1010 Board ABX00023
Quick Overview
₹3,369.00 ₹2,695.20
The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the MKR WiFi 1010 is your one-stop-solution for many of the basic IoT application scenarios.
The MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. Its equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WiFi-based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption.
Pinout diagram:
This thin board has been designed to offer a practical and cost-effective solution for makers to design IoT projects with minimal previous experience in networking. It is based on the low power Arm Cortex-M0 32-bit SAMD21, which is part of the Arduino MKR family. Wireless devices specifically designed for the Internet of Things (IoT).
Use your MKR board on Arduinos IoT Cloud, a simple and fast way to ensure secure communication for all of your connected Things.
Features:
- Digital I/O Pins: 8
- PWM Pins: 12
- Flash Memory: 256 KB
- SRAM: 32 KB
- Microcontroller: SAMD21 Cortex-M0+ 32-bit low-power ARM MCU
- Board Power Supply (USB/VIN): 5V
- Full-speed USB device and embedded host
- Pre-mounted headers with pin-out
Package Includes:
1 x Official Arduino MKR Wifi 1010 Board ABX00023
| Item Type: | MKR Series Board |
|---|---|
| Model Type: | MKR WiFi |
| Model No.: | ABX00023 |
| Microcontroller: | SAMD21 |
| Microcontroller Chip | SAMD21 Cortex-M0+ 32bit low power ARM MCU (datasheet) |
| Radio | u-blox NINA-W102 (datasheet) |
| Board Power Supply | 5V (USB/VIN) |
| Secure Element | ATECC508 (datasheet) |
| Supported Battery | Li-Po Single Cell, 3.7V, 1024mAh Minimum |
| Operating Voltage (VDC): | 3.3V |
| Digital I/O Pins | 8 |
| PWM Pins | 13 (0 .. 8, 10, 12, 18 / A3, 19 / A4) |
| Interface: | 1 x UART 1 x SPI 1 x I2C |
| Analog Input Pins | 7 (ADC 8/10/12 bit) |
| Analog Output Pins | 1 (DAC 10 bit) |
| External Interrupt: | 8 (0, 1, 4, 5, 6, 7, 8, 16 / A1, 17 / A2) |
| DC Current per I/O Pin (mA) | 7 mA |
| Memory: | CPU Flash Memory 256 KB (internal) SRAM 32 KB EEPROM no |
| Clock Speed | 32.768 kHz (RTC), 48 MHz |
| Additional Specs.: | D hole For BO Motor (mm): 6, LED_BUILTIN |
| Length (mm): | 61.5 mm |
| Width (mm): | 25 mm |
| Weight (g): | 32 |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 8 4 2 cm |
There are no reviews yet.